LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1368 (Power Steering System) >> Repair Instructions >> Remote Power Steering Fluid Reservoir Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the reservoir to the bracket.
    2. NOTE: Refer to Installing Hoses without Twists or Bends Notice in Cautions and Notices.
  2. Install the reservoir outlet hose and the hose clamp to the reservoir.
  3. Install the reservoir inlet hose and the hose clamp to the reservoir.
    4. NOTE: Refer to Using Proper Power Steering Fluid Notice in Cautions and Notices.
  4. Add fluid to the reservoir. Refer to Checking and Adding Power Steering Fluid .
    5. NOTE: Refer to Air in the Power Steering System Notice in Cautions and Notices.
  5. Bleed the power steering system. Refer to Bleeding the Power Steering System .
    6. Fig 1: Reservoir Cap And Cold/Hot, Min/Max Marks
    GM819768Courtesy of GENERAL MOTORS CORP.
  6. Install the reservoir cap (2).
scientia non olet · About LEMON Manuals