LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1365 (Disc Brake System) >> Repair Instructions >> Disc Brake Splash Shield Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front wheel hub and bearing. Refer to Wheel Hub, Bearing, and Seal Replacement in Front Suspension.
    2. Fig 1: Brake Splash Shield Components
    GM899520Courtesy of GENERAL MOTORS CORP.
  2. Remove the 3 bolts (4,5,7) and the brake shield (3) from the knuckle (2).
scientia non olet · About LEMON Manuals