LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1365 (Disc Brake System) >> Repair Instructions >> Brake Caliper Bracket Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the disc brake hardware and the slide pin boots. Refer to Disc Brake Hardware Replacement - Front .
    2. Fig 1: Caliper Bracket Bolts
    GM817291Courtesy of GENERAL MOTORS CORP.
  2. Remove the 2 bolts (1).
  3. Remove the bracket.
scientia non olet · About LEMON Manuals