LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1362 (Parking Brake System) >> Repair Instructions >> Park Brake Warning Lamp Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Exploded View Of Parking Brake Components
    GM853219Courtesy of GENERAL MOTORS CORP.
  1. Install the park brake switch (5) to the park brake lever.
  2. Install the screw (12) to the park brake switch.
  3. Connect the park brake switch electrical connector (10).
  4. Inspect the park brake lever travel. Adjust the park brake lever travel if necessary. Refer to Park Brake Adjustment (Drum Brakes)  or Park Brake Adjustment (Disc Brakes) .
  5. Install the rear floor console. Refer to Console Replacement - Rear Floor in Instrument Panel, Gages, and Console.
scientia non olet · About LEMON Manuals