Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Lubricating Park Brake Hardware

Courtesy of GENERAL MOTORS CORP.

Apply Lubriplate® Lubricant, GM P/N 1050109 (Canadian P/N 5264008), or the equivalent, to the metal contact points on the backing plate (1) and the adjuster strut (3).
Assemble the adjuster strut (2,3,4).

Fig 2: Exploded View Of Drum Brake System

Courtesy of GENERAL MOTORS CORP.

Install the park brake hardware (7,8,9,10,11,12,13,23,24) with the shoes. Refer to Brake Shoe Replacement (FWD) or Brake Shoe Replacement (AWD) .
Install the drum (17). Refer to Brake Drum Replacement .