Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Lubricating Brake Components

Courtesy of GENERAL MOTORS CORP.

Apply Lubriplate® Lubricant, GM P/N 1050109 (Canadian P/N 5264008), or the equivalent, to the metal contact points on the following components:
- The backing plate (1)
- The park brake shoe lever (2)
- The adjuster strut (3)
- The adjuster (4,5,6)
Assemble the adjuster.

Fig 2: Park Brake Components

Courtesy of GENERAL MOTORS CORP.

Install the park brake hardware (4,5,6,7,10,11,14,15) with the park brake shoes. Refer to Park Brake Shoe Replacement .
Install the rear disc (12). Refer to Brake Rotor Replacement - Rear in Disc Brakes.