LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1361 (Seat Belt System) >> Repair Instructions >> Seat Belt Retractor Replacement - Left Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the left rear seat. Refer to Seat Replacement - Rear in Seats.
  2. Remove the left rear seat hinge. Refer to Seat Back Hinge Replacement - Rear Outer .
  3. Remove the left rear door sill trim. Refer to Door Sill Plate Replacement .
  4. Remove the left rear seat garnish trim.
  5. Remove the rear storage compartment. Refer to Storage Compartment Replacement - Rear .
  6. Remove the rear compartment access panel. Refer to Accessory Panel Replacement - Rear .
  7. Remove tool storage access panel. Refer to Accessory Panel Replacement - Rear .
  8. Remove tool storage tray.
  9. Remove child tether upper anchor brackets. Refer to Child Restraint Tether Anchor Replacement (Upper) .
  10. Remove the left lower quarter trim panel. Refer to Trim Panel Replacement - Rear Quarter Lower .
  11. Fig 1: Retractor Bolts, Adjuster, Bolt, Cover, And Retractor Assembly
    GM832164Courtesy of GENERAL MOTORS CORP.
  12. Remove the left shoulder adjuster bolt cover (1).
  13. Remove the left shoulder adjuster bolt (8).
  14. Remove the left shoulder adjuster (7).
  15. Remove the lower anchor bolt (5).
  16. Remove the upper retractor bolt (3).
  17. Remove the lower retractor bolt (4).
  18. Remove the retractor assembly (2).