Removal Procedure
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the right rear seat cushion lower bolts. Refer to Seat Cushion Replacement - Rear in Seats.
- Remove the rear seat belt retractor lower anchor bolt (5).
- Remove the right rear seat back panel. Refer to Trim Panel Replacement - Rear Seat Back (Left) or Trim Panel Replacement - Rear Seat Back (Right) .
- Remove the seat belt guide (1).
- Pull seat belt lower anchor through rear seat back.
- Remove the following components from the vehicle:
- The mounting bolt (3)
- The rear seat center belt retractor (2)