LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1361 (Seat Belt System) >> Repair Instructions >> Seat Belt Buckle Replacement - Right Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front Seat And Seat Belt Switch Electrical Connector
    GM743464Courtesy of GENERAL MOTORS CORP.
  1. Remove the front floor rear console. Refer to Console Replacement - Rear Floor in Instrument Panel, Gages and Console.
  2. Position the front seat (1) in a forward position in order to gain access to the seat belt switch electrical connector (2).
  3. Disconnect the seat belt switch electrical connector (2).
    4. Fig 2: Inner Adjuster Finish Cover, Seat Belt Buckle, Screws And Bolts
    GM830097Courtesy of GENERAL MOTORS CORP.
  4. Remove the following components from the front seat:
    • The 2 screws (1)
    • The inner adjuster finish cover (4)
    • The bolt (3)
    • The seat belt buckle (2)
scientia non olet · About LEMON Manuals