LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1361 (Seat Belt System) >> Repair Instructions >> Seat Belt Buckle Replacement - Left Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front Seat And Seat Belt Switch Electrical Connector
    GM743464Courtesy of GENERAL MOTORS CORP.
  1. Remove the front floor rear console. Refer to Console Replacement - Rear Floor in Instrument Panel, Gages and Console.
  2. Position the front seat (1) in a forward position in order to gain access to the seat belt switch electrical connector (2), on the left front buckle only.
  3. Disconnect the seat belt switch electrical connector (2), on the left front buckle only.
    4. Fig 2: Seat Belt Buckle, Inner Adjuster Finish Cover And Seat Bracket
    GM241543Courtesy of GENERAL MOTORS CORP.
  4. Remove the following components from the front seat:
    • The screw
    • The inner adjuster finish cover (2)
    • The bolt
    • The seat belt buckle (1)
scientia non olet · About LEMON Manuals