Diagnostic Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 GMC C3500 HD, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- If SIR Diagnostic System Check has been performed, go to next step. If SIR Diagnostic System Check has not been performed, go to SIR DIAGNOSTIC SYSTEM CHECK .
- Turn ignition off. If air bags have deployed, go to step 5. If air bags have not deployed, go to next step.
- Inspect vehicle and undercarriage for signs of impact. If impact has occurred, go to step 5. If no impact has occurred, go to next step.
- Replace SDM. See SENSING & DIAGNOSTIC MODULE (SDM) under REMOVAL & INSTALLATION. Go to step 6.
- Replace components and perform inspections as required following an accident. See POST-COLLISION INSPECTION . Go to next step.
- Reconnect all SIR components. Go to SIR DIAGNOSTIC SYSTEM CHECK .