Temperature Control Cable Adjustment

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Door Lever, Temperature Control Cable And Clip

Courtesy of GENERAL MOTORS CORP.

Remove the temperature control cable (3) from the clip (2) at the HVAC module assembly.
Set the temperature control dial to coldest position.
Hold the door lever (1) fully rearward, clockwise.
Install the cable (3) to the clip (2).
Test the cable for smooth operation.
Test that the door opens fully in both directions.