LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1357 (Steering Wheel & Steering Column) >> Repair Instructions >> Steering Shaft Coupling Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Refer to Steering Column in Lock Position Notice in Cautions and Notices.
  1. LOCK the steering column and verify the front wheels are in the straight ahead position.
  2. Move the silencer pad away from the steering column.
    3. Fig 1: Steering Shaft, Couplings, And Bolts
    GM820173Courtesy of GENERAL MOTORS CORP.
  3. Use paint in order to place match marks on the steering shaft coupling (3) and on the shaft (4).
  4. Remove the upper bolt (7) from the coupling.
  5. Remove the lower bolt (6) from the coupling.
  6. Move the coupling (2) onto the steering column shaft (1).
  7. Remove the coupling from the steering column shaft.
scientia non olet · About LEMON Manuals