LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1353 (Engine Mechanical - 1.8L (LNK)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Positive Crankcase Ventilation (PCV) Valve Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 1: PCV Valve, PCV Valve Hose, PCV Valve Hose Clamp
    GM827374Courtesy of GENERAL MOTORS CORP.
  1. Install the PCV valve (1) into the cylinder head.

    Tighten:  Tighten the PCV valve to 27 N.m (13 lb ft).

  2. Connect the PCV valve hose (3) to the PCV valve (1).
  3. Secure the PCV valve hose with one clamp (2).
scientia non olet · About LEMON Manuals