LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1353 (Engine Mechanical - 1.8L (LNK)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Cylinder Head Cover Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine cover.
  2. Remove the ignition coils. Refer to Ignition Coil(s) Replacement .
    3. Fig 1: PCV Hoses At Cylinder Head Cover
    GM824977Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the 2 Positive Crankcase Ventilation (PCV) hoses from the cylinder head cover.
  4. Remove the 2 nuts and 1 bolt from the ventilation pipe.
  5. Remove the ventilation pipe and gasket.
  6. Remove the 9 bolts, wire harness protector, cylinder head cover and gasket.
  7. Remove the O-ring from the cylinder head cover.
scientia non olet · About LEMON Manuals