LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1353 (Engine Mechanical - 1.8L (LNK)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Crankshaft Pulley Removal

Crankshaft Pulley Removal

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required 

J 8614-01  Pinion Flange Holder. See Special Tools and Equipment .

    Fig 1: Removing Crankshaft Pulley Retaining Bolt Using J 8614-01
    GM234153Courtesy of GENERAL MOTORS CORP.
  1. Remove the crankshaft pulley retaining bolt using J 8614-01  to prevent crankshaft rotation when loosening the bolt. See Special Tools and Equipment .
  2. Remove the crankshaft pulley.
scientia non olet · About LEMON Manuals