Camshaft Removal - Intake

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Using Wrench To Hold/Rotate Camshaft

Courtesy of GENERAL MOTORS CORP.

Remove the intake camshaft sprocket bolt.

Fig 2: View Of Sprocket Locating Pins

Courtesy of GENERAL MOTORS CORP.

Remove the cam shaft sprocket.
Remove the camshaft timing gear and camshaft bearing cap.

Fig 3: Intake Camshaft Bearing Cap Bolts In Sequence

Courtesy of GENERAL MOTORS CORP.

Remove the intake camshaft bearing cap bolts in sequence. Starting at the ends and working toward the center of the camshaft.
Remove the front camshaft bearing cap.
Remove the intake camshaft from the cylinder head.