Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Using Wrench To Hold/Rotate Camshaft

Courtesy of GENERAL MOTORS CORP.

Remove the exhaust camshaft sprocket bolt.

Fig 2: View Of Sprocket Locating Pins

Courtesy of GENERAL MOTORS CORP.

Remove the camshaft sprocket.
Remove the camshaft timing gear and camshaft bearing cap No.1

Fig 3: Exhaust Camshaft Bearing Cap Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the exhaust camshaft bearing cap bolts in sequence. Starting at the ends and working toward the center of the camshaft.
Remove the front camshaft bearing cap.
Remove the exhaust camshaft from the cylinder head.