LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1352 (Engine Mechanical - 1.8L (LV6)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Drive Belt Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
    2. Fig 1: Identifying Serpentine Drive Belt Routing
    GM244267Courtesy of GENERAL MOTORS CORP.
  2. Use a wrench and rotate the belt tensioner clockwise.
  3. With pressure applied to the wrench, and tension relieved from the drive belt, remove the accessory drive belt.
scientia non olet · About LEMON Manuals