Removal Procedure
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable.
- Remove the crankshaft pulley. Refer to Crankshaft Pulley Replacement .
- Use a screwdriver and pry out the crankshaft front oil seal.
CAUTION:
Refer to Battery Disconnect Caution
in Cautions and Notices.
IMPORTANT:
To protect the crankshaft from damage, wrap the tip of the screwdriver with tape.