LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1352 (Engine Mechanical - 1.8L (LV6)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Intake Manifold Removal

Intake Manifold Removal

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the EVAP hose for the ORVR.
  2. Disconnect the brake booster vacuum hose.
  3. Remove the oil dipstick guide bolt.
  4. Remove two bolts and one nut from the intake manifold bracket.
    5. Fig 1: Intake Manifold Bolts And Nuts
    GM828279Courtesy of GENERAL MOTORS CORP.
  5. Remove the intake manifold bolts and nuts.
  6. Remove two bolts from the alternator bracket.
  7. Remove the intake manifold and gasket.
scientia non olet · About LEMON Manuals