LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1348 (Engine Control System (Introduction) -- 1.8L (LNK)) >> Repair Instructions >> Secondary Air Injection (AIR) Solenoid Valve Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: AIR Solenoid Valve, Vacuum Hoses And Fastener
    GM1313453Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the electrical connector from the secondary air injection (AIR) solenoid valve.
  2. Disconnect the 2 vacuum hoses (3) from the AIR solenoid valve (3).
  3. Remove the fastener (1) from the AIR solenoid valve (2).
  4. Remove the AIR solenoid valve (2) from the intake manifold.
scientia non olet · About LEMON Manuals