Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Twisting Quick Connect Fitting

Courtesy of GENERAL MOTORS CORP.

Grasp both sides of the quick connect fitting and twist 1/4 turn in each direction in order to loosen any dirt.

CAUTION: Wear safety glasses when using compressed air in order to prevent eye injury.

Fig 2: Blowing Dirt Out Of Fitting (Plastic Collar)

Courtesy of GENERAL MOTORS CORP.

Remove any dirt, dust, or other foreign material from the quick connect fitting with compressed air.

Fig 3: Squeezing Quick Connect Fitting Release Tabs (Plastic Collar)

Courtesy of GENERAL MOTORS CORP.

Squeeze the release tabs on the plastic retainer.

Fig 4: Pulling Connection Apart (Plastic Collar)

Courtesy of GENERAL MOTORS CORP.

Pull the quick connect fuel fitting apart. Use a shop towel to catch any remaining fuel that may leak from the fuel line and the fitting.