LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1348 (Engine Control System (Introduction) -- 1.8L (LNK)) >> Repair Instructions >> Fill Limiter Vent Valve Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing FLVV Cover
    GM851881Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
  2. Use a screwdriver in order to release the lock tab of the FLVV cover (1).
  3. Remove the FLVV cover (1) by rotating the cover counter clockwise while lifting up.
    4. Fig 2: Inserting Pry Tool Between FLVV
    GM851885Courtesy of GENERAL MOTORS CORP.
  4. Insert a pry tool (2) between the FLVV (1) and the FLVV gasket.
  5. Lift all around the outer edge of the FLVV and remove the FLVV (1) from the fuel tank.
scientia non olet · About LEMON Manuals