Noteworthy Ignition Information

Consider the following important information when servicing the ignition system:

• The ignition coils secondary output voltage is more than 40,000 volts. Avoid body contact with the ignition high voltage secondary components when the engine is running or personal injury may result.
• The ignition timing is not adjustable. A timing indicator and timing marks are still visible at the crankshaft pulley but are not used to set or adjust the ignition timing. The PCM provides all ignition timing adjustments electronically.
• Be careful not to damage the secondary ignition coil boots when servicing the ignition system. Rotate each ignition coil in order to loosen the boot from the spark plug before removing. Never pierce a secondary ignition boot for any testing purposes. Future ignition system problems are guaranteed if pinpoints or test lights are pushed through the secondary ignition component insulation during testing.
• Do not use a conventional tachometer in order to check the engine speed on this ignition system. An inductive type pickup will not provide reliable engine speed information. Use a scan tool in order to monitor the engine RPM.