LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1347 (Engine Control System (Introduction) - 1.8L (LV6)) >> Repair Instructions >> Fill Limiter Vent Valve Replacement (AWD) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: FLVV Cover And Bolts
    GM851897Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel tank. Refer to Fuel Tank Replacement (FWD)  or Fuel Tank Replacement (AWD) .
  2. Remove the three bolts (2) and the FLVV cover (1) from the fuel tank.
  3. Disconnect the two EVAP lines from the FLVV.
  4. Fig 2: FLVV, Gasket And Bolts (AWD)
    GM851898Courtesy of GENERAL MOTORS CORP.
  5. Remove the three bolts (2) and the FLVV (1) and gasket (3) from the fuel tank.