Circuit Description
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
The circuit opening relay provides ignition positive voltage to the fuel pump. The circuit opening relay is controlled by the powertrain control module (PCM) and receives ignition positive voltage from the EFI relay. The PCM monitors the crank signal circuit for voltage when the ignition switch is in the START (engine cranking) position. When the crank signal circuit indicates the engine is cranking the PCM energizes the circuit opening relay. The PCM also energizes the circuit opening relay whenever starter switch indicates cranking. If the CKP signal circuit does NOT indicate cranking, the PCM energizes the circuit opening relay based on starter switch input.