LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1345 (General Information) >> Introduction >> Lifting and Jacking the Vehicle >> Jack Stands >> Under the Frame Rails >> Under the Rear Suspension Crossmember

Under the Rear Suspension Crossmember

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: The jack stands must not be placed under the (rear suspension crossmember) front reinforcement rib.

Position the jack stands as follows:

Spanning both of the (rear suspension crossmember) rear reinforcement ribs.

scientia non olet · About LEMON Manuals