Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Wiper Transmission, Torx Bolts And Wiper Motor

Courtesy of GENERAL MOTORS CORP.

Install the wiper transmission (1) to the wiper motor (3).

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the 2 torx bolts (2) which secure the wiper transmission (1) to the wiper motor (3).
Tighten: Tighten the windshield wiper transmission bolts to 7.5 N.m (66 lb in).

Fig 2: Engaging Lower Rod To Crank Arm

Courtesy of GENERAL MOTORS CORP.

Engage the meshing of the lower rod (1) to the crank arm (2).

Fig 3: Disengaging/Engaging Lower Rod To Crank Arm

Courtesy of GENERAL MOTORS CORP.

Engage the meshing of the upper rod (1) to the crank arm (3).
Install the windshield wiper motor assembly. Refer to Wiper Motor Replacement in Wipers/Washers.