LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1344 (Wiper System & Washer System) >> Repair Instructions >> Wiper Motor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Electrical Connector, Assembly Bolts And Motor Assembly
    GM821301Courtesy of GENERAL MOTORS CORP.
  1. Remove the wiper arms. Refer to Wiper Arm Replacement  in Wipers and Washers.
  2. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
  3. Disconnect the wiper motor electrical connector (1).
  4. Remove the 2 wiper motor assembly bolts (2).
  5. Remove the wiper motor assembly (3) from the engine compartment.
  6. Remove the wiper transmission. Refer to Wiper Transmission Replacement  in Wipers and Washers.