LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1344 (Wiper System & Washer System) >> Repair Instructions >> Washer Solvent Container Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the screws from the lower right side wheel house panel and reposition wheel house panel for access to washer solvent container.
  2. Disconnect the 2 washer pump electrical connectors (1).
    Fig 1: Washer Pumps, Washer Solvent Container And Washer Pump Hoses
    GM827645Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the washer pump hoses (4) from the washer pumps (3).
  4. Remove the 3 bolts which secure the windshield washer solvent container (2).
  5. Squeeze tabs on filler neck and pull down to remove washer solvent container (2) from vehicle.
  6. Drain solvent from washer solvent container (2).
  7. Remove the washer pumps (1) from the washer solvent container (2).