Removal Procedure
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the screws and push-in retainers from the right front lower wheel house panel. Refer to Wheelhouse Panel Replacement in Body Front End.
- Drain the washer solvent from the washer solvent container.
- Disconnect the front or rear washer pump electrical connector (1).
- Disconnect the front or rear washer hose (4) from the front or rear washer pump (3).
- Using a small flat-bladed tool, remove the front or rear washer pump (3) from the washer solvent container (2).