LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1344 (Wiper System & Washer System) >> Repair Instructions >> Washer Pump Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Washer Pumps, Washer Solvent Container And Washer Pump Hoses
    GM827645Courtesy of GENERAL MOTORS CORP.
  1. Position the front or rear washer pump (3) to the washer solvent container (2) pressing in until fully seated.
  2. Connect the front or rear washer hose (4) to the front or rear washer pump (3).
  3. Connect the front or rear washer pump electrical connector (1).
  4. Fill the washer solvent container (2) with washer solvent.
  5. Refasten the right front lower wheel house panel. Refer to Wheelhouse Panel Replacement in Body Front End.