Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Washer Nozzle And Hood

Courtesy of GENERAL MOTORS CORP.

Install the nozzle (1) to the hood (2). Ensure that the retaining tabs are fully engaged.

Fig 2: Washer Nozzle Hose, Washer Nozzle And Hood Insulator

Courtesy of GENERAL MOTORS CORP.

Install the hose (1) to the nozzle (2).
Reposition the hood insulator (4) back to its original position. Secure the insulator with the 2 plastic retainers.