LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1344 (Wiper System & Washer System) >> Repair Instructions >> Washer Nozzle Replacement - Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Tape Around Rear Washer Nozzle
    GM755878Courtesy of GENERAL MOTORS CORP.
  1. Apply tape to the area around the rear washer nozzle.
  2. Using a small flat-bladed tool, remove the rear washer nozzle from the liftgate.
  3. Remove the rear washer hose from the rear washer nozzle.
  4. Remove the rear washer nozzle from the liftgate.
scientia non olet · About LEMON Manuals