LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1344 (Wiper System & Washer System) >> Repair Instructions >> Hose Replacement (Hose Connector to Washer Nozzle) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Hose Connector Components
    GM858809Courtesy of GENERAL MOTORS CORP.
  1. Install the washer hose (3) to the vehicle and connect the hose to the following components:
    • The hose connector (2)
    • The washer nozzle (4)
  2. Reposition the hood insulator back to its original position. Secure the insulator with the 3 plastic retainers.
scientia non olet · About LEMON Manuals