LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1344 (Wiper System & Washer System) >> Repair Instructions >> Hose Replacement (Hose Connector to Washer Container) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Hose Connector Components
    GM858809Courtesy of GENERAL MOTORS CORP.
  1. Install the washer hose (1) to the vehicle and connect to the washer pump.
  2. Connect the washer hose (1) to the Y-shaped hose connector (2).
  3. Install the right front wheelhouse panel liner. Refer to Wheelhouse Panel Replacement in Body Front End.
  4. Fill the washer solvent container with washer solvent, as necessary.
scientia non olet · About LEMON Manuals