LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1343 (Bumper System) >> Repair Instructions >> Impact Bar Replacement - Rear Bumper >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Bumper Impact Bar Components
    GM821611Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear bumper fascia. Refer to Fascia Replacement - Rear Bumper  .
  2. Remove the rear bumper fascia energy absorber. Refer to Energy Absorber Replacement - Rear  .
  3. Remove the following components from the vehicle:
    • The 4 nuts (2)
    • The rear bumper impact bar (1)
    • The 4 push-in retainers (3) and the 2 rear bumper stays (4) from the impact bar (1), if necessary
scientia non olet · About LEMON Manuals