LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1343 (Bumper System) >> Repair Instructions >> Energy Absorber Replacement - Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Energy Absorber, Bumper Impact Bar And Center Reinforcement
    GM821602Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear bumper fascia. Refer to Fascia Replacement - Rear Bumper  .
  2. Remove the rear bumper fascia energy absorber (3) from the rear bumper impact bar (1).
  3. Remove the rear bumper bar center reinforcement (2) from the rear fascia energy absorber (3).
scientia non olet · About LEMON Manuals