Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Energy Absorber, Bumper Impact Bar And Center Reinforcement

Courtesy of GENERAL MOTORS CORP.

Install the rear bumper bar center reinforcement (2) to the rear fascia energy absorber (3).
Install the rear bumper fascia energy absorber (3) to the rear bumper impact bar (1).
Install the rear bumper fascia. Refer to Fascia Replacement - Rear Bumper .