LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1343 (Bumper System) >> Repair Instructions >> Energy Absorber Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front Energy Absorber
    GM821144Courtesy of GENERAL MOTORS CORP.
  1. Install the front bumper fascia energy absorber (1) to the front bumper impact bar.
  2. Install the front bumper fascia. Refer to Fascia Replacement - Front Bumper  .
scientia non olet · About LEMON Manuals