Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Protective Tape, Roof Drip Molding And Flat Bladed Tool

Courtesy of GENERAL MOTORS CORP.

Apply protective tape (1) around the roof drip molding (3).
Use a flat bladed tool (2) to remove roof drip molding (3)

Fig 2: Roof Drip Molding, Clips And Roof

Courtesy of GENERAL MOTORS CORP.

Disengage the roof drip molding (1) from the clip (2) and remove the roof drip molding (1) from the roof (3).