LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1342 (Exterior Trim) >> Repair Instructions >> Flare Replacement - Front Fender >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front Fender Flare, Screws, And Plastic Retainers
    GM828514Courtesy of GENERAL MOTORS CORP.
  1. Remove the 3 screws (3) from the rear lower fender flare (2).
  2. Disengage the fender flare plastic retainers from the fender (1).
  3. Remove the fender flare (2) from the fender (1).
  4. Remove the plastic retainers from the fender flare, if necessary.
scientia non olet · About LEMON Manuals