LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1342 (Exterior Trim) >> Repair Instructions >> Flare Replacement - Front Fender >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front Fender Flare, Screws, And Plastic Retainers
    GM828514Courtesy of GENERAL MOTORS CORP.
  1. Install the plastic retainers to the fender flare (2), if removed.
  2. Install the fender flare (2) to the fender (1).
  3. Install the screws (3) to the fender flare (2).
scientia non olet · About LEMON Manuals