LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1341 (Body Front End) >> Repair Instructions >> Hood Insulator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Hood Components
    GM431910Courtesy of GENERAL MOTORS CORP.
  1. Raise and suitably support the hood.
  2. Remove the following components from the hood (2):
    • The 8 plastic retainers
    • The hood insulator (1)