LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1341 (Body Front End) >> Repair Instructions >> Hood Hold-Open Rod Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Hood Hold-Open Rod, Retaining Clip And Grommet
    GM869704Courtesy of GENERAL MOTORS CORP.
  1. Raise and suitably support the hood.
  2. Remove the hood hold-open rod (1) from the retaining clip (3).
  3. Rotate the hold-open rod (1) from the normal rest position 90 degrees counterclockwise.
  4. Pull forward and remove the hold-open rod (1) from the grommet (2).
scientia non olet · About LEMON Manuals