LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1341 (Body Front End) >> Repair Instructions >> Hood Hinge Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the hood. Refer to Hood Replacement  .
  2. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement  .
  3. Remove the left front fender, if necessary. Refer to Fender Replacement - Front - Left  .
  4. Remove the right front fender, if necessary. Refer to Fender Replacement - Front - Right  .
    5. Fig 1: Remove/Install Hood Hinge
    GM239365Courtesy of GENERAL MOTORS CORP.
  5. Mark the position of the hood hinges to ease assembly.
  6. Remove the hinge bolts from the hood.
  7. Remove the hood hinge (1).
scientia non olet · About LEMON Manuals