LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1341 (Body Front End) >> Repair Instructions >> Hood Bumper Replacement

Hood Bumper Replacement

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Removal Procedure

    Fig 1: Rotate Hood Bumpers
    GM239367Courtesy of GENERAL MOTORS CORP.
  1. Raise and suitably support the hood.
  2. Remove the hood front bumper (1) from the vehicle by unscrewing.

Installation Procedure

    Fig 2: Rotate Hood Bumpers
    GM239367Courtesy of GENERAL MOTORS CORP.
  1. Install the hood front bumper (1). Turn the bumper all the way down.
  2. Perform the vertical hood adjustment. Refer to Hood Adjustment  .
  3. Lower the hood.