LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1341 (Body Front End) >> Repair Instructions >> Air Inlet Grille Panel Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Air Inlet Grille Components
    GM821320Courtesy of GENERAL MOTORS CORP.
  1. Remove the windshield wiper arms. Refer to Wiper Arm Replacement in Wipers/Washer System.
  2. Remove the following components from the vehicle:
    • The 2 plastic retainers (1)
    • The air inlet grille panels (2)
  3. Remove the rear hood seal from the air inlet grille panel, if necessary. Refer to Seal Replacement - Hood Rear  .