LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1341 (Body Front End) >> Repair Instructions >> Air Inlet Grille Panel Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Air Inlet Grille Components
    GM821320Courtesy of GENERAL MOTORS CORP.
  1. Install the rear hood seal to the air inlet grille panel, if removed. Refer to Seal Replacement - Hood Rear  .
  2. Install the air inlet grille panels (2) to the vehicle.
  3. Install the 2 plastic retainers (1).
  4. Install the windshield wiper arms. Refer to Wiper Arm Replacement in Wipers/Washer System.
scientia non olet · About LEMON Manuals